氣力輸送倉泵的就地控制柜是用于控制倉泵現場運行的設備，通常每臺倉泵設置一臺，也可多臺倉泵設置一套，置于倉泵體上。以下是其相關介紹：

　　The local control cabinet of the pneumatic conveying bin pump is a device used to control the on-site operation of the bin pump. Usually, one bin pump is set up for each bin pump, or multiple bin pumps can be set up in one set and placed on the bin pump body. Here is the relevant introduction:

　　功能

　　function

　　手動操作：柜內設有電器控制按鈕、電磁閥與模擬面板，通過“手動/自動”旋鈕切換至手動模式，可對倉泵上的所有氣動閥門進行單獨操作，如打開或關閉進料閥、出料閥等，主要用于倉泵的調試和故障維修時的現場操作。

　　Manual operation: The cabinet is equipped with electrical control buttons, solenoid valves, and analog panels. By switching to manual mode through the "manual/automatic" knob, all pneumatic valves on the bin pump can be operated separately, such as opening or closing the feed valve, discharge valve, etc. It is mainly used for on-site operation during the debugging and fault maintenance of the bin pump.

　　自動運行：當旋鈕打到自動位時，就地控制柜在控制系統的控制下，按照預設程序自動控制倉泵的進料、流化加壓、輸送等工作流程，實現物料的連續輸送。同時，模擬面板可實時模擬顯示該泵的當前工作狀態。

　　Automatic operation: When the knob is turned to the automatic position, the local control cabinet, under the control of the control system, automatically controls the feeding, fluidization pressurization, and conveying processes of the bin pump according to the preset program, achieving continuous material conveying. At the same time, the simulation panel can simulate and display the current working status of the pump in real time.

　　組成

　　compose

　　電源部分：通常接受就地配電箱提供的AC220V電源，為控制柜內的電器元件、PLC分站等提供電力。

　　Power supply: It usually receives AC220V power from the local distribution box to provide power for electrical components, PLC substations, etc. inside the control cabinet.

　　PLC分站及模塊：部分就地控制柜內設PLC分站，并選配AI/DI/DO模塊，用于采集現場信號（如壓力、料位等）和控制閥門等執行元件的動作。

　　PLC substation and modules: Some local control cabinets are equipped with PLC substations and AI/DI/DO modules, which are used to collect on-site signals (such as pressure, material level, etc.) and control the actions of executing components such as valves.

　　電磁閥組：用于控制倉泵的氣動閥門，通過電磁線圈的通斷來切換氣路，從而實現閥門的開閉。

　　Electromagnetic valve group: used to control the pneumatic valve of the bin pump, switching the air path through the on/off of the electromagnetic coil to achieve the opening and closing of the valve.

　　技術參數

　　Technical Specifications

　　電源電壓：一般為AC220V。

　　Power supply voltage: generally AC220V.

　　防護等級：根據現場工況而定，部分采用雙層門密封，防護等級可達到IP54以上，以適應粉塵、潮濕等惡劣環境。

　　Protection level: Depending on the site conditions, some parts are sealed with double-layer doors, and the protection level can reach IP54 or above to adapt to harsh environments such as dust and humidity.

　　本文由  倉泵 友情奉獻.更多有關的知識請點擊  http://www.mengjianfilm.com/  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會(huì )陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Cang Pump For more related knowledge, please click http://www.mengjianfilm.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.